KMT1 Mechanic Trucks
Work Ready Units
KMT1-11 Ford Extended Cab 4x4
Chassis
- 2012 Ford F-550 chassis
- 4 Wheel drive
- 6.7 V8 diesel engine
- 6 Speed automatic transmission
- Extra heavy duty alternator
- Payload plus package upgrade
- Cruise control
- Power mirrors
- AM/FM stereo CD/CLK
- 19,5000 lbs. GVWR
Body
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodeposition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included
KMT1-11 Ford Regular Cab 4x4
Chassis
- 2012 Ford F-550 chassis
- 4 Wheel drive
- 6.7 V8 diesel engine
- 6 Speed automatic transmission
- Extra heavy duty alternator
- Paylod plus package upgrade
- Power mirrors
- 19,500 lbs. GVWR
Body
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodepsition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included
KMT1-11 Ford Regular Cab 4x2
Chassis
- 2012 Ford F-550 chassis
- Rear wheel drive
- 6.7 V8 diesel engine
- 6 Speed automatic transmission
- Extra heavy duty alternator
- Paylod plus package upgrade
- Power mirrors
- 19,500 lbs. GVWR
Body
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodepsition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included
KMT1-11 Terrastar Regualr Cab 4x2
Chassis
- 2012 International Terrastar chassis
- Rear wheel drive
- Maxxforce V8 diesel engine
- 5 Speed automatic transmission with overdrive
- Hand throttle control mounted on steering wheel for engine speed control for PTO
- Remote mounted engine control with ignition switch control
- 40 Gallon top draw fuel tank
- Air conditioning
- Power windows and locks
- 19,500 GVWR
Body
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodepsition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane (shown with optional Autocrane 6406H Crane)
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included
KMT1-11 Ram Regular Cab 4x4
Chassis
- 2012 Ram 5500 chassis
- 4 Wheel drive
- 6.7 V8 diesel engine
- 6 Speed automatic transmission
- Air Conditioning
- 19,500 GVWR
Chassis
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodepsition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included
KMT1-11 Ram Regular Cab 4x2
Chassis
- 2012 Ram 5500 chassis
- Rear wheel drive
- 6.7 V8 diesel engine
- 6 Speed automatic transmission
- Air Conditioning
- 19,500 GVWR
Chassis
- Knapheide 6132DLR-38J 11' crane body with torq-islolator crane support system and torsion box understructure
- A-40 galvanneal steel compartments and doors with 3/16" tread plate floor and 1/8" tread plate tops and backs
- Compartment floors and end panels are 12 gauge steel with 14 gauge double panel, hat section reinforced compartment doors
- Complete immersion in Knapheide's electrodepsition prime paint system
- (6) Recessed D-ring cargo tie downs installed in floor with a 6,000 lb. maximum capacity
- (2) Heavy duty aluminum grab handles on both sides at the rear of body
- LED S/T/T lights, clearance lights, and backup lights
- 21" Work surface rear bumper with through compartments
- Vise plate mounted on rear bumper
- 2" Receiver tube mounted at the rear
- (2) Grip strut flex steps mounted at the rear
- 16" High double panel slam tailgate with center one hand release latch
- Knapliner commercial grade spray-on bed liner on cargo floor, sides, compartment tops, bulkhead, and tailgate
- Master locking system to secure entire side of compartments with one easy motion and a padlock
- (4) Auxiliary halogen lights installed on the body
- (2) Hydraulic rear outriggers installed
- (1) Manual front outrigger installed on the curb side
- 97db Audible backup alarm
Crane
- Stellar 7621 crane with 38,000 ft.-lbs. and 7,500 lbs. maximum capacity
- Planetry winch at 60' minute speed with 21' hydraulic reach
- Crane hook, snatch block, boom support, wireless remote, and in cab controls included
Air Compressor
- Boss 36 CFM Compressor with Reelcraft 50' x 1/2" hose reel and roller fairlead through street side rear compartment
- FLR system and underbody air tank included