“Fuel Transfer Tanks” has been added to your cart.
A Gooseneck Service Body and Flatbed Fusion
If you need a flatbed with more storage than the side skirts on our PGTC model offer, the PGTE Gooseneck Truck Bed — with its raised front compartments — might be just what you’re looking for. While the PGTD leans more toward a full-on gooseneck service body, the PGTE hits the sweet spot for those who want the best of both worlds: a gooseneck flatbed and a service body in one.
3 Year Limited Warranty guaranteeing no body rust-through and defect-free material and workmanship when used as directed.
Constructed from 14-gauge, A-40 galvanneal steel for unmatched strength and durability.
B&W Turnoverball® stowing hitch system rated for 30,000 lb. gross trailer weight and 7,500 lb. tongue weight.
Skirted flatbed with raised front compartments, underbody rear compartments, stake pockets, rub rails and screened bulkhead.
Designed for Class 2 and above single and dual rear wheel cab chassis.
B&W Turnoverball® hitch rated for 30,000 lb. gross trailer weight and 7,500 tongue weight.
E-Coat Immersion
Knapheide Bodies are fully immersed in Knapheide's 12-step, electrodeposition prime paint system for superior corrosion resistance.
Finish Paint
Durable oven-cured finish coat paint on top of Knapheide's exclusive electrodeposition prime paint for a clean overall appearance.
Rub Rails
Rub Rails installed on both sides of body for strap, side and stake pocket protection.
Bulkhead
Formed, integrated bulkhead with screened window and tapered design to conform to cab contours and increase operator visibility.
Stake Pockets
Reinforced internal stake pockets are sized to accept 2x4 lumber as well as a wide array of Knapheide side options
Door Seals
Triple contact door seals provides protection against the outside elements for your tools and equipment.
Stainless Steel Hinge
Continuous stainless steel hinge for unmatched security and corrosion resistance, backed by the Knapheide six year warranty.
Automotive Latch
Automotive quality, paddle-activated rotary style latches make opening and closing easy. Low maintenance and stylish, the latches are covered under Knapheide's six year warranty.
Internal Latch Cover
Latch interior cover secures the latch to the door and protects the internal latch mechanisms from being damaged. Appearance may vary.
Security Ring
Adjustable security ring strikers provide strength, security, and a weather tight seal throughout the entire life of the body.
Flooring
Rugged 1/8"-thick treadplate floor that can withstand jobsite abuse.
Compartment Doors
Features double-shell, 20-gauge, two-sided A-40 galvanneal steel compartment doors
Door Retainer
Knapheide’s exclusive double-spring door retainer design that features maintenance-free operation for the life of the body. The all-black finish provides a clean appearance and is designed to resist wear and environmental exposure.
Marker Lights
All marker, clearance, and I.D. lights are LED.
LED Lights
Replacement for incandescent stop/tail/turn lights. Offering brighter light and a superior life span compared to incandescent lights.
Integrated Fuel Fill
Integrated driver side fuel fill for added convenience. Placement dependent upon length of body.
Body Options
Stake Racks
Cargo Tie Downs
Compartment Lighting
Receiver Hitch
Tailboard Channels
3/16" Treadplate Floor
Knapheide Tool Boxes
Power Locks
Aluminum Mechanics Drawers
Stake Racks
Secure cargo on your Gooseneck body with 6" steel stake racks. 15" stake racks are also available for the PGTB and PGTC gooseneck models. Racks are secured in internal stake pockets by an internal spring-loaded system.
Cargo Tie Downs
Ideal for safely securing heavy equipment in your cargo area. Zinc-plated. Rated at 2,000 lbs. Number of tie downs and layout may depend on body type and length.
Compartment Lighting
LED strip lighting ideal for Service, Utility or Gooseneck body. Controlled and operated via vehicle up fitter switch. Switch kit and door activated switch kits also available. Multiple lengths available.
Receiver Hitch
Bolt-on, Class V hitches with safety chain attachment points for rear of body. Hitch for 8' and shorter body lengths has a 2" receiver and a 16,000 lbs. rating. Hitch for 9' and 11' bodies has 2.5" receiver and a 21,000 lbs. rating. Receiver hitch models are compliant with SAE J3352 performance standards.
Tailboard Channels
These slots at the back of the raised front compartments let you drop in boards to help keep cargo in place. They’re easy to remove when you need full use of the bed. Tailboards not included.
3/16" Treadplate Floor
3/16" Treadplate floor installed in lieu of the standard 12 gauge treadplate floor for additional floor strength. Available on any PGTB and PGTC Gooseneck Bodies.
Knapheide Tool Boxes
Knapheide tool boxes are a great supplement to many types of truck bodies. They are lockable and come in multiple sizes for mounting above and under the body to fulfill additional storage needs.
Power Locks
Available option for Service Bodies and KUV models using Ford E-Series or GM Express/Savana cutaway chassis. Standard feature on KUV models using Ford Transit or Ram ProMaster cutaway chassis. Integration with chassis keyless entry system (if equipped) allows for both body and cab to be operated with chassis key fob.
Aluminum Mechanics Drawers
Aluminum alloy construction manufactured by C-Tech. Available in multiple configurations. Rated for maximum of 250 lbs. Appearance may vary.
Add-ons
Air Compressors
All-In-One Mobile Power Systems
Power Inverters
Power Take Off Units
Welders
Grill Guards
Steps
Trailer Hitches
Winches
Backup Alarms
Salt Spreaders and Brine Sprayers
Snow Plows
Fuel Transfer Tanks
Lube Skids
Air Compressors
Field technicians use air compressors for diverse tasks, including powering pneumatic tools such as impact wrenches and drills, inflating tires, cleaning equipment with air blow guns, spray painting, conducting emergency repairs, and performing testing and diagnostics. The versatility of compressed air allows the operator to address a wide range of maintenance and repair tasks on-site, enhancing efficiency and enabling roadside assistance for vehicles, machinery and other equipment.
All-In-One Mobile Power Systems
Technicians rely on all-in-one mobile power systems on service trucks to offer a compact solution that combines a generator, air compressor, welder, and occasionally a battery charger into a single unit. This mobile setup takes up less space than individual sets of equipment and ensures dedicated power is delivered for electrical tools, welders, pneumatic devices, and various electronics. This makes the operator capable of performing a range of servicing tasks with greater efficiency on the jobsite.
Power Inverters
Technicians use power inverters on work vehicles for converting direct current (DC) electricity from the vehicle's battery into alternating current (AC) electricity to charge or operate power tools, laptops, cellphones, lighting, and other electronic devices one may use in field work. A dependable power source is essential for seamless on-the-go customer and business communication, as well as for efficiently executing installation, maintenance, and repair tasks that rely on electricity.
Power Take Off Units
These transmission, engine or driveline mounted units harness mechanical power from the vehicle's running engine to operate many kinds of onboard equipment a technician may use on the jobsite. A PTO may power hydraulic systems in heavy lifting or pulling equipment like cranes, winches and hoists, air compressors used in pneumatic tools, welders, or produce electricity for generators to operate power tools. They are most popular in applications that demand high power output and efficiency.
Welders
Fabricate or modify metal on-the-go with portable or mounted, fuel or engine driven welding equipment. This is useful for creating custom or replacing worn components, fixing structural issues, securing loose parts, or addressing damages to equipment and other items, whether for your own needs or as service to others. Knapheide can provide guidance, procure, and install the most suitable welder, factoring in materials frequently worked on, their thickness, and the technician's skill level.
Grill Guards
The primary purpose of grill guards is to provide protection to the vehicle's front end, especially the grill and headlights, from potential damage caused by collisions with animals, debris, or other objects. In rural or off-road settings, work vehicles are more susceptible to encounters with wildlife, and they help minimize the risk of damage. Grill guards also often come with mounting points, allowing work vehicles to be equipped with auxiliary lighting, winches, or other accessories.
Steps
Work vehicles are often large and elevated, making it challenging for individuals to access the cab or cargo area without assistance. Steps play a crucial role in providing a convenient means for drivers and operators to enter and exit while reducing the chances of physical strain or injury due to slipping or falling. The fixed or retractable accessories, available in varying lengths, allow for a more productive work environment for those interacting with these vehicles on a regular basis.
Trailer Hitches
Hitches are rear mounted connectors on commercial vehicles that allow operators to safely tow trailers filled with cargo. These are crucial because they significantly expand a vehicle's hauling capacity, enabling them to transport large quantities of goods, equipment, or materials needed for various business operations. Without hitches, commercial vehicles would be limited to their own bed capacity, hindering efficiency and potentially requiring additional trips.
Winches
Commercial vehicles, especially those engaging in off-road activities, may encounter challenging terrains or obstacles. A winch can be used for self-recovery or to assist other vehicles by providing the necessary pulling power to get them out of difficult situations. They can also be valuable in reaching, lifting or positioning a range of loads including heavy equipment, holding up structures temporarily, or handling large or bulk amounts of materials around the jobsite.
Backup Alarms
Backup alarms, also known as reversing alarms, are crucial safety devices for vehicles, especially those with large blind spots or frequently operating in areas with high foot traffic. They emit an audible warning sound when the vehicle is in reverse gear, alerting nearby pedestrians, cyclists, and other drivers of the vehicle's movement and potential danger zone. This helps to prevent collisions and accidents, particularly in situations where the driver might not have a clear view behind them. Knapheide and it's partners upfit many of the heavy equipment, industries and vehicles where backup alarms are an integral piece of safety equipment.
Salt Spreaders and Brine Sprayers
Spreaders and sprayers efficiently distribute dry granular salt or liquid brine onto roads and paved surfaces, preventing the formation of ice and enhancing traction. These specialized devices improve safety by reducing the risk of accidents caused by slipping or sliding and are more efficient than manual spreading methods. They are crucial for those responsible for maintaining roadways during winter weather, ensuring that travel remains safe and efficient even in challenging conditions.
Snow Plows
When others count on you during winter weather conditions, you can count on Knapheide Truck Equipment Center to provide you with the highest quality snow removal products like pushers, plows, and blades that will help you make easy work of the toughest snow removal jobs.
Fuel Transfer Tanks
Adding a transfer tank to your commercial vehicle can transform it into a portable fuel station. These are often mounted in a bed or cargo area and are used to transport extra diesel or other fuels to allow extended operating range, convenient on-site refueling for heavy equipment, and eliminates the need for frequent trips to the gas station--saving time and money.
Lube Skids
Add mobile maintenance and lubrication convenience, portability and versatility to your commercial vehicle with the addition of a lube skid. These units are typically mounted within a commercial vehicle's cargo and are designed for servicing other commercial vehicles in the field with grease, lubricants and other fluids.
